diff --git a/hosts/lkk-nix-1/system.nix b/hosts/lkk-nix-1/system.nix
deleted file mode 100644
index f93ab79..0000000
--- a/hosts/lkk-nix-1/system.nix
+++ /dev/null
@@ -1,141 +0,0 @@
-# Edit this configuration file to define what should be installed on
-# your system.  Help is available in the configuration.nix(5) man page
-# and in the NixOS manual (accessible by running ‘nixos-help’).
-
-{
-  network = {
-    description = "LANA KK Prod";
-    enableRollback = true;
-  };
-  lkk-nix = { config, pkgs, ... }: {
-    imports = [ # Include the results of the hardware scan.
-      ./hardware-configuration.nix
-    ];
-    deployment.targetHost = "89.58.10.189";
-    # Use the GRUB 2 boot loader.
-    boot.loader.grub.enable = true;
-    boot.loader.grub.version = 2;
-    # boot.loader.grub.efiSupport = true;
-    # boot.loader.grub.efiInstallAsRemovable = true;
-    # boot.loader.efi.efiSysMountPoint = "/boot/efi";
-    # Define on which hard drive you want to install Grub.
-    boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only
-
-    networking.hostName = "LKK-NIX"; # Define your hostname.
-    # Pick only one of the below networking options.
-    # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
-    # networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
-
-    # Set your time zone.
-    time.timeZone = "Europe/Berlin";
-
-    # Configure network proxy if necessary
-    # networking.proxy.default = "http://user:password@proxy:port/";
-    # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
-
-    # Select internationalisation properties.
-    # i18n.defaultLocale = "en_US.UTF-8";
-    # console = {
-    #   font = "Lat2-Terminus16";
-    #   keyMap = "us";
-    #   useXkbConfig = true; # use xkbOptions in tty.
-    # };
-
-    # Enable the X11 windowing system.
-    # services.xserver.enable = true;
-
-    # Configure keymap in X11
-    # services.xserver.layout = "us";
-    # services.xserver.xkbOptions = {
-    #   "eurosign:e";
-    #   "caps:escape" # map caps to escape.
-    # };
-
-    # Enable CUPS to print documents.
-    # services.printing.enable = true;
-
-    # Enable sound.
-    # sound.enable = true;
-    # hardware.pulseaudio.enable = true;
-
-    # Enable touchpad support (enabled default in most desktopManager).
-    # services.xserver.libinput.enable = true;
-
-    # Define a user account. Don't forget to set a password with ‘passwd’.
-    users.users.m3tam3re = {
-      isNormalUser = true;
-      extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
-      #   packages = with pkgs; [
-      #     firefox
-      #     thunderbird
-      #   ];
-    };
-
-    users.users.m3tam3re.openssh.authorizedKeys.keys = [
-      "ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABgQC3YEmpYbM+cpmyD10tzNRHEn526Z3LJOzYpWEKdJg8DaYyPbDn9iyVX30Nja2SrW4Wadws0Y8DW+Urs25/wVB6mKl7jgPJVkMi5hfobu3XAz8gwSdjDzRSWJrhjynuaXiTtRYED2INbvjLuxx3X8coNwMw58OuUuw5kNJp5aS2qFmHEYQErQsGT4MNqESe3jvTP27Z5pSneBj45LmGK+RcaSnJe7hG+KRtjuhjI7RdzMeDCX73SfUsal+rHeuEw/mmjYmiIItXhFTDn8ZvVwpBKv7xsJG90DkaX2vaTk0wgJdMnpVIuIRBa4EkmMWOQ3bMLGkLQeK/4FUkNcvQ/4+zcZsg4cY9Q7Fj55DD41hAUdF6SYODtn5qMPsTCnJz44glHt/oseKXMSd556NIw2HOvihbJW7Rwl4OEjGaO/dF4nUw4c9tHWmMn9dLslAVpUuZOb7ykgP0jk79ldT3Dv+2Hj0CdAWT2cJAdFX58KQ9jUPT3tBnObSF1lGMI7t77VU= m3tam3re@m3-nix"
-    ];
-
-    # List packages installed in system profile. To search, run:
-    # $ nix search wget
-    # environment.systemPackages = with pkgs; [
-    #   vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
-    #   wget
-    # ];
-
-    # Some programs need SUID wrappers, can be configured further or are
-    # started in user sessions.
-    # programs.mtr.enable = true;
-    # programs.gnupg.agent = {
-    #   enable = true;
-    #   enableSSHSupport = true;
-    # };
-
-    # List services that you want to enable:
-
-    # Enable the OpenSSH daemon.
-    services.openssh.enable = true;
-    services.openssh.permitRootLogin = "yes";
-
-    services.gitea = {
-      enable = true;
-      rootUrl = "https://code.lanakk.com";
-    };
-
-    services.caddy = {
-      enable = true;
-      extraConfig = ''
-      code.lanakk.com {
-                 reverse_proxy localhost:3000
-                 tls {
-		                 issuer zerossl
-	               }	
-      }
-      ''
-      ;
-    };
-
-    # Open ports in the firewall.
-    networking.firewall.allowedTCPPorts = [ 80 443 ];
-    # networking.firewall.allowedUDPPorts = [ ... ];
-    # Or disable the firewall altogether.
-    networking.firewall.enable = true;
-    networking.firewall.allowedTCPPortRanges = [{
-      from = 3000;
-      to = 3100;
-    }];
-
-    # Copy the NixOS configuration file and link it from the resulting system
-    # (/run/current-system/configuration.nix). This is useful in case you
-    # accidentally delete configuration.nix.
-    # system.copySystemConfiguration = true;
-
-    # This value determines the NixOS release from which the default
-    # settings for stateful data, like file locations and database versions
-    # on your system were taken. It‘s perfectly fine and recommended to leave
-    # this value at the release version of the first install of this system.
-    # Before changing this value read the documentation for this option
-    # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
-    system.stateVersion = "22.11"; # Did you read the comment?
-
-  };
-}